Showing posts with label ITY knit. Show all posts
Showing posts with label ITY knit. Show all posts

Tuesday, January 5, 2021

Minerva ITY Knit - Wrap Dress

This post may contain affiliate links. This means that if you click through and make a purchase from these links, I may earn a small commission at no extra cost to you.


Once again I've used fabric that was gifted to me from Minerva.com in exchange for a blog post!

This ITY knit is the perfect fabric for a wrap dress...which I've never made or worn before. 
I love the print!




I chose McCall's 6884 - view C - which has been in my stash for quite a while. 


  I was never sure how this style would look on me. But once I tried it on and made a few adjustments, I loved it SEW much that I didn't want to take it off!

Adjustments were interesting! 
Because I'd never made or worn this style of dress, I wasn't sure where to start. 

In the end, I really only needed to reduce the width of the under panel.  I gradually cut it until I'd removed about 3 inches. Of course I had to try it on each time until I was happy with it. This took a while, but it was worth it.  

I'm wearing a camisole underneath so that I'd be covered - if I happened to bend over.
I'm very happy with the outcome and the fit! 


I'm wearing my Mom's pearls with it.  I think she'd love the look as much as I do!

Most of the construction was done on my serger.  All hemming was completed on my sewing machine.


As always, with ITY knits...I used a fusible knit stay tape on the shoulders, neckline, hem and sleeves.  It stabilizes those areas, which extend the life of the garments.


I used a narrow (lightening bolt or wobble) stitch to hem the sleeves and bottom of the dress.



The pattern doesn't call for it, but I added a snap to the inside to ensure that the inside panel doesn't fall below the outside...I wanted to keep the hem even...even when I'm moving.



This is now one of my favorite dresses!  
I will definitely make it again...and I'll stick to using knits for it.

 

Monday, July 23, 2018

What's On Top?

This post may contain affiliate links. This means that if you click through and make a purchase from these links, I may earn a small commission at no extra cost to you.

TOPS, TOPS and More TOPS!

Many of you may have seen my Facebook and/or Instagram post about this beautiful Kente print.  I had used it for so many other people and projects, that I think I became a bit envious and decided to make something for myself!  





















It's 100% cotton Ankara fabric from LeeLou Designs 720 and was perfect for this peplum top.

I used McCall's 6896 as my base.  I chose this pattern because the bodice and peplum are all one piece.  I really don't like the look of peplums that are attached to the bottom of the bodice...that seam line just does not look good on me.

Of course I hacked it! There is just no fun in using patterns or in sewing if you don't hack something.  So this was the hack of the day! 😄

I wanted the look of view E, because I loved the slight open V front. Sorry, I did not get a great picture of that part.

I definitely had to do some print matching, which was fun, but oh so tedious!  I usually use as few pins as possible in my projects, but for print matching those tiny diagonal white lines, I needed pins.  I then used my walking foot to help keep them in place.  I've seen this print in RTW and it was not matched at all and looked horrible.  I was determined that my top would not look that!  LOL!




I didn't want just any sleeve, so I drafted a sort of butterfly sleeve. I wasn't sure I'd like it, but after much thought about other sleeve options, I committed to it.  In the end, not only did I like it, I loved it!  

Per the instructions I inserted a back zipper, but I chose to use an invisible zipper. I finished all the edges with black .25" purchased bias binding.




And...if you haven't guessed it already, this black top is the same pattern! I used a lightweight stable knit from my stash.  My hacks for this top was to eliminate the back seam and zipper, make the sleeves elbow length (my favorite sleeve length) and lower the front and back neckline about 1.5 inches.  The hems are narrow hems.


I paired it with a self drafted maxi skirt that I think I'm still working on. I'm just not sure I like it.
I purchased this ITY print last summer from Vogue Fabrics

I also paired it with black cropped pants.  Don't you just love versatile pieces in your wardrobe? 

Why are all my necklaces crooked in all of these pics?  LOL!




And for this final top...final for this post...there will never be a "final" top! Hahaha!
My sewing sisters are kinda on this Walmart hunt for fabric, as it seems that Walmart has upped it's fabric selection game...at least in the South.  Even though I'm not in the South, I was not to be outdone!  So I went to my local Walmart (which doesn't sell fabric) and kinda demanded that they find out which store nearest me sold fabric.  I was nice, but insistent!  LOL!

It turned out to be only about 15 minutes from the local store. So I went there and found this fabric, which was perfect because I'd been hankering for some camo fabric. This is a very lightweight knit...who knows what it really is...there was no "content" listed on the bolt.  

But not to be defeated, I prewashed it and treated it as an ITY knit and used one of my self drafted patterns.  I added stretch lace from my stash to the upper bodice and sleeves to make this "hard/soft" top.

Walmart fabric or not, I love this top and have worn it at least 5 times since I made it. It has held up quite well to machine washings.

Yes, I made my cork tote bag.  It is getting a lot of use as well. So much so, that I'm going to make it again with upholstery fabric!

In fact, I love all of these tops sew much that I'm going to make some variation of each of them again.
Don't be surprised if you see one in pink...I've committed to a PINK CHALLEGE.
And you know how much I like challenges!


And last, but definitely not least:
I am excited to announce that I will be starting my ONLINE SEWING CLASSES in the very near future...maybe a month or so from now. 
Classes will be pre-recorded with a few FaceBook live tutorials. There will also be some content on You Tube. Of course my blog and tips will continue here.

I have a ton of ideas swirling around in my head, but I need your feedback regarding what types of sewing classes and/or techniques you are interested in.

Please comment below on your class ideas, needs and wants. If you are not comfortable with commenting below, please feel free to send me a PM.

Thanks for all of your support thus far! Can't wait to see your ideas! 



Thursday, June 28, 2018

Godet Anyone?

This post may contain affiliate links. This means that if you click through and make a purchase from these links, I may earn a small commission at no extra cost to you.

Godet: 
A triangular piece of material inserted in a dress, shirt, or glove to make it flared or for ornamentation.


Not only did I enjoy making this top, but I really enjoyed wearing it!  I wore this to a friend's 
surprise graduation party last weekend.  
I wish I could have worn higher heels, but age and aches prevents that more often than not! 😁




The pattern is Butterick 6248 and has a few variations to select from.
I've had this pattern for about a year or so.  I initially bought it to make view B with a super lightweight sweater knit, but still haven't decided what to do with that fabric. 





I ended up making view A because I've been stuck sewing in my dining room while roof repairs were being done.  I needed instant gratification! And I got it!  





I purchased this fun ITY print from Vogue Fabrics during an expo.  I have no idea which expo and as I went to several last year.  The pieces were sold in 2 yard pieces and I'm glad that I bought 2 pieces...4 yards.




                                                Can you believe I didn't hack it!  Hahahaha!





Check out that godet!
It extends from the back/waist to the hemline. For some reason, I always worry that I won't get the godet right, but in most cases I do.  Then I'm always surprised.  I have no idea why I worry!  They are so much fun once finished.😄






And of course, there was some print matching to do.  Although I'm not 100% happy with it (thanks to distractions during the layout), I think it turned out well overall.




I will definitely be wearing this top a lot and am already planning to make another one...maybe stripes or a floral with some sort of hack. 

What do you think?



Let's Make and Wear a Kaftan

This post may contain affiliate links. This means that if you click through and make a purchase from these links, I may earn a small commiss...