Showing posts with label McCall's. Show all posts
Showing posts with label McCall's. Show all posts

Tuesday, January 5, 2021

Minerva ITY Knit - Wrap Dress

This post may contain affiliate links. This means that if you click through and make a purchase from these links, I may earn a small commission at no extra cost to you.


Once again I've used fabric that was gifted to me from Minerva.com in exchange for a blog post!

This ITY knit is the perfect fabric for a wrap dress...which I've never made or worn before. 
I love the print!




I chose McCall's 6884 - view C - which has been in my stash for quite a while. 


  I was never sure how this style would look on me. But once I tried it on and made a few adjustments, I loved it SEW much that I didn't want to take it off!

Adjustments were interesting! 
Because I'd never made or worn this style of dress, I wasn't sure where to start. 

In the end, I really only needed to reduce the width of the under panel.  I gradually cut it until I'd removed about 3 inches. Of course I had to try it on each time until I was happy with it. This took a while, but it was worth it.  

I'm wearing a camisole underneath so that I'd be covered - if I happened to bend over.
I'm very happy with the outcome and the fit! 


I'm wearing my Mom's pearls with it.  I think she'd love the look as much as I do!

Most of the construction was done on my serger.  All hemming was completed on my sewing machine.


As always, with ITY knits...I used a fusible knit stay tape on the shoulders, neckline, hem and sleeves.  It stabilizes those areas, which extend the life of the garments.


I used a narrow (lightening bolt or wobble) stitch to hem the sleeves and bottom of the dress.



The pattern doesn't call for it, but I added a snap to the inside to ensure that the inside panel doesn't fall below the outside...I wanted to keep the hem even...even when I'm moving.



This is now one of my favorite dresses!  
I will definitely make it again...and I'll stick to using knits for it.

 

Sunday, December 2, 2018

Sweater Hack!

This post may contain affiliate links. This means that if you click through and make a purchase from these links, I may earn a small commission at no extra cost to you.

Sweater Hack!

If you know anything about my sewing style,
you know that I love a great pattern hack! 



This time I hacked Butterick 6244! I found a medium weight navy sweater knit at Joann's a few weeks before I went to the Houston International Quilt Festival last month.  Due to the changing weather in Chicago, I knew I needed something warm to wear while traveling - and I did not want to lug a full coat!

I was looking for denim for a totally different garment!  But when I saw this fabric, I forgot about the denim, because I knew this sweater knit would be perfect for transitioning from the Chicago cold to the cold aircraft to Houston (which was not as warm as it was last year).  The waterfall front was perfect for wrapping myself in this warm knit!




The pattern is designed to be longer in the front than in the back (a look I don't like for myself).  Sew... I reversed it and made the back longer and made it curved it vs. leaving it straight.  I love the resulting feminine look of the back!

I also hacked the waterfall shape of the front - I wanted soft edges vs sharp angles! I jokingly told the ladies in my FaceBook Group that I did 8000 fittings.  It certainly felt like that, but I am more than happy with the front shaping!

Now that all the fittings are done - I now have a new pattern that I can make again.  Oh yes, I make and keep copies of most of my hacks!

I completed most of the construction on my serger.  I set my differential feed to 2.0 for the entire construction.  Even though my current compulsion is bias binding finishes, I finished the edges on the serger by decreasing the stitch length - that gave the edges full coverage.  I opted to turn the sleeves up 3/4" and top-stitched them.






I think this is a very versatile piece! It can be dressed up or down!  And it is now one of my staple pieces! I received quite a few compliments in both the O'hare and Houston Airports! A Supervisor at the Houston Airport has actually commissioned me to make one for her!

A young design student in the Houston airport asked me to take it off so she could see the inside...I happily obliged!  She REALLY examined it!  I enjoyed watching her turn it inside and out and back inside again.  The entire time she was examining it, I could not help but think of what I often say to my students and other sewists...our me-made garments need to look as good on the inside as they do on the outside!




 Are you making cardigans or dusters this season?  My next Online Sewing Course will be a cardigan - which can be lengthened to a duster...with pockets! It will be available this month.  You can purchase the stand alone course or you can opt to purchase the 6 month membership, which includes all 6 courses regardless of when you join!

My classes include bonus videos for those who purchase the membership program.  This month the bonus videos will be about pockets...with a free pattern!


Happy Endless Sewing!


Don't want to miss a blog post? Sign up for email notices.


Monday, October 2, 2017

Ankara Coat of Many Colors

 Ankara/African Print Coat/Duster 

This very colorful Ankara/African Print Coat/Duster was my last "make" for National Sewing Month!


I entered it into an African Print Challenge!
I'm loving these challenges.
I learn sew much with each entry!


I had much fun and a few challenges putting this "puzzle" together. I really had to pay attention to the direction of the print on this Ankara/African fabric for each piece...even the band...I wanted to be sure the black side showed when I wear it... not the printed side. I tried it on more than I usually do to get it right!

Hacks:
* I hacked McCall's 6844 - https://mccallpattern.mccall.com/m6844
* This pattern is designed for knits...my fabric is a woven...I had to make several adjustments to the flounce to make it fit properly. 
* I lengthened the jacket about 15 inches
* Just before I started construction, I decided to add side-seam pockets
* I also cut the sleeves short and added a flounce and lined them with the print fabric. After all, this is the year of the sleeve!
* I finished the side seams and sleeves with a Hong Kong finish - another element I decided on during construction



* I finished the hem with black bias binding - I really didn't want the suggested narrow hem to be seen and I love that the bias tape brings all of the black accents together.
















Someone called her my
Magical Wizard Sewing Cloak!

 What would you call her?
  I think she needs a name!
 

 As always, please feel to free to leave your comments/questions below!


Let's Make and Wear a Kaftan

This post may contain affiliate links. This means that if you click through and make a purchase from these links, I may earn a small commiss...